IBM Tivoli and Cisco - Manual (Page 206)

188 Building a Network Access Control Solution with IBM Tivoli and Cisco Systems
3. Assign the policy to this new group. Select the group in the navigation tree in
the left pane and click Actions
→
Policy
→
Add policy, as shown in
Figure 6-57.
Figure 6-57 Add policy menu selection
4. The Select a policy window is displayed, as shown in Figure 6-58. Select the
IISSCN_TCM_v2.00_winXP policy (the one we changed in 6.2,
“Configuration of the compliance policies” on page 152) and click OK.
Figure 6-58 Policy selection window