IBM Tivoli and Cisco - Manual (Page 289)

Chapter 7. Network enforcement subsystem implementation 271
Configuring Network Access Profiles
We have now configured all of the individual components to be in a position to
bring them together and create the Network Access Profiles, which determine
what to check and what action to take based on the results of those checks.
Again, we have deleted all of the pre-configured sample configs to create our
own from scratch.
1. Select Network Access Profiles from the main menu, which brings you to
the dialog in Figure 7-50.
Figure 7-50 Network Access Profiles
2. Click Add Profile.
3. For the name, enter the name of the profile, such as NAC_IISSCN . Add a
description and ensure that the box for Active is checked.
Allow any Protocol
type
should be checked. Click Apply and Restart.