IBM Tivoli and Cisco - Manual (Page 276)

258 Building a Network Access Control Solution with IBM Tivoli and Cisco Systems
18.Click Add Rule to get to the screen shown in Figure 7-40.
Figure 7-40 Condition set creation for TSCM
19.Click Add Condition Set. From the Attribute drop-down menu, select
IBMCorporation:SCM:PolicyVersion. From the Operator menu select
Contains, and for the Value enter the value of the security policy being used
on the Security Compliance Manager server. In this example, the policy
version is IISSCN_EBU_v2.20_winXP. Click Enter.
Note: This is to enforce the version of the TSCM policy being used. There
is only an exact match option available. This means that all clients will be
running the same policy version. It is critical when setting this check that
you get the policy version name and syntax correct or the checks will fail.
We also discovered that if you set the operator value to an equals sign (=),
the check will fail even though the end user is running the correct version of
the policy.