IBM Tivoli and Cisco - Manual (Page 339)

Chapter 7. Network enforcement subsystem implementation 321
When a client connects to a controlled port, the port is assigned to the
authentication VLAN. After the client has been successfully authenticated, the
port is assigned to the Access VLAN specified in the port profile or the role
settings.
1. Select Switch Management
→
Profiles
→
Port
→
New (Figure 7-89).
Figure 7-89 New port profile
2. Enter a profile name. We used Control_20 . Enter a description. Ensure that
Manage this port is checked.
3. Under VLAN Settings, set the Auth VLAN ID to 120. Set the Default Access
VLAN ID to 20. Access VLAN should be set to Default Access VLAN.