Intel MD566X User Manual
Page 59
56K V.92 Data, Fax, and Voice Chipset
Programmer’s Guide
Intel Confidential
59
+PCW=m
0
Call Waiting Enable: This command controls the action to be taken upon detection
of call waiting in a V.92 DCS.
m = 0
Toggle V.24 Circuit 125 and collect Caller ID if enabled by +VCID
m = 1
Hang up
m = 2
Ignore V.92 call waiting
+PMH=m
0
Modem on Hold Enable: This command controls whether or not modem on hold
procedures are enabled during V.92 operation.
m = 0
Enables V.92 modem on hold
m = 1
Disables V.92 modem on hold
+PMHT=m
none
Modem on Hold Timer: This command controls whether or not the modem will
grant or deny a Modem on-hold (MOH) request as well as setting the Modem-on-
Hold-Timeout.
m = 0
Deny V.92 Modem-on-hold Request
m = 1
Grant MOH with 10 second timeout
m = 2
Grant MOH with 20 second timeout
m = 3
Grant MOH with 30 second timeout
m = 4
Grant MOH with 40 second timeout
m = 5
Grant MOH with 1 minute timeout
m = 6
Grant MOH with 2 minute timeout
m = 7
Grant MOH with 3 minute timeout
m = 8
Grant MOH with 4 minute timeout
m = 9
Grant MOH with 6 minute timeout
m = 10
Grant MOH with 8 minute timeout
m = 11
Grant MOH with 12 minute timeout
m = 12
Grant MOH with 16 minute timeout
m = 13
Grant MOH with indefinite timeout
Table 3-4.
Data Mode Command Descriptions (Continued)