Intel MD566X - Manual (Page 15)

56K V.92 Data, Fax, and Voice Chipset
Programmer’s Guide Intel Confidential 15
\K2, 3 Nondestructive/expedited
\K4, 5 Nondestructive/nonexpedited
* \Nn Set operating mode 3 0–4 yes
\N0, \N1
Selects Buffer (Normal) mode with speed
buffering
\N2 Selects MNP Reliable mode
\N3 Selects V.42 Auto-reliable mode
\N4 Selects V.42 Reliable mode
\O Originate reliable link none – no
* \Qn Set serial port flow control 3 0–3 yes
\Q0 Disables flow control
\Q1 XON/XOFF software flow control
\Q2 Unidirectional hardware flow control
\Q3 Bidirectional hardware flow control
* \T0 Disables inactivity timer 0 0–90 yes
\U Accept reliable link none – no
* \Xn Set XON/XOFF pass-through 0 0, 1 yes
\X0 Processes flow control characters
\X1
Processes flow control characters and
passes to local or remote
\Y Switch to Reliable mode none – no
\Z Switch to Normal mode none – no
* -Jn Set V.42 detect phase 1 0, 1 yes
-J0 Disables the V.42 detect phase
-J1 Enables the V.42 detect phase
* "Hn V.42 bis compression control 3 0–3 yes
“H0 Disables V.42 bis
“H1
Enables V.42 bis only when transmitting
data
“H2 Enables V.42 bis only when receiving data
“H3
Enables V.42 bis for both transmitting and
receiving data
"On V.42 bis string length 32 6–250 yes
+DS44=m V.44 data compression
3,0,0,
471,942,
140,140,
1884,
3768
See note a no
a. See the +DS44=m description in Table 3-4 for a full command description of parameter ranges.
Table 2-2. V.44 / V.42 / V.42 bis MNP
∗
Command Summary (Continued)
Note Command Function Default Range
Reported
by &Vn