Interphase Tech iSPAN - Manual (Page 79)

Chapter 4: Installing the NDIS Software Package
iSPAN Serial WAN Adapter Users Guide 59
Next, the following message prompts you to restart your
computer to make changes take effect.
Figure 4-19. Network Settings Restart Message
2. To make the settings take effect, click Yes.
Removing the Base Driver Only
C
AUTION
Use this procedure only if you have already removed the
NDIS driver and all other drivers that require the Base
driver.
To remove the Base driver, do the following:
1. Be sure you are logged on with administrator rights
to the Windows NT 4.0 system.
2. From the Start menu, select Settings, and then Control
Panel. Then double-click the Add/Remove Programs
icon, and select the Install/Uninstall tab.