Interphase Tech iSPAN - Manual (Page 154)

Inserting and Setting Up Interphase Link Services
134 Interphase Corporation
Configuring SDLC Card Configuration Settings
To configure SDLC card configuration settings, do the
following:
1. Select the Card Configuration tab to display the Card
Configuration dialog box.
Figure 8-6. SDLC Link Service Card Configuration
2. In the Card field, make sure the appropriate adapter is
selected (5535-1P-SR).
3. If you want to change the default firmware or hardware
properties of the adapter, click the WAN Setup button
to start the WAN Adapters Setup utility. Then follow
the instructions in
Setting up Firmware and Hardware
on page 145 .