Interphase Tech iSPAN - Manual (Page 177)

Chapter 9: Setting up Firmware and Hardware
iSPAN Serial WAN Adapter Users Guide 157
The Frame Relay Data Link Properties dialog box
appears.
Figure 9-7. Frame Relay Data Link Properties
b. Select the link management protocol, frame size,
and connection values that match the parameters of
your Frame Relay provider.
c. Click OK to save the data link properties and return
to the Frame Relay Protocol Properties dialog box.
5. To change default serial line properties for a Frame
Relay network configuration, do the following:
a. Select the Frame Relay configuration, and then click
the Properties button in the Port section.