Interphase Tech iSPAN - Manual (Page 32)

Installing the Adapter
12 Interphase Corporation
C
AUTION
The adapter is packed in an antistatic bag to protect it
during shipment. Keep the adapter in its protective
antistatic bag until you are ready to install it in the host
computer. To prevent damage to the adapter due to
electrostatic discharge, wear a grounding strap on your
wrist or ankle and handle the adapter only by its edges. Do
not touch its components or any metal parts other than
the faceplate.
1. Open the shipping container and carefully remove its
contents from the antistatic bag.
2. Inspect each item for damage. If you find any omissions
or damage, contact your network supplier and the
carrier (for example, UPS or Federal Express) that
delivered the package.
Installing the Adapter
W
ARNING
Your computer operates at voltages that can be lethal.
Follow all cautions and warnings in this installation
procedure, both to protect yourself and prevent damage
to your computer. Use only tools with nonconductive
handles, or tools coated with, covered with, or made with
nonconductive materials. Nonconductive materials are
materials that do not conduct electric current, such as
plastic, rubber and fiberglass.