Motorola A1200 - Manual (Page 25)

23 essentials
battery charging
New batteries are not
fully charged. Open the
protective cover on your
phone’s accessory
connector port, then
insert the battery
charger plug into the accessory connector
port on the side of your phone as shown, and
plug the other end into an electrical outlet.
Your phone might take several seconds to
start charging the battery, and might require
several hours to charge fully. The display
shows Charge Complete when finished.
Tip: Relax, you can’t overcharge your battery.
It will perform best after you fully charge and
discharge it a few times.
Note: You can charge the battery when the
phone is off or the battery is completely
discharged.
Note: You can charge your battery
by connecting a cable from your
phone’s mini-USB port to a USB
port on a computer. Both your
phone and the computer must be turned on,
and your computer must have the correct
software drivers installed. Cables and
software drivers are available in
Motorola Original data kits, sold separately.
memory card
You can use an optional removable
MicroSD memory card with your phone
to store and retrieve multimedia
content (such as photos, video clips, and
music files).
Caution: Don’t bend or scratch your memory
card. Keep it away from static electricity,
water, and dirt.