Environmental specifications, Electronic specifications, Memory map – Gateway E-9425R User Manual
Page 91

www.gateway.com
85
Environmental specifications
The following specifications identify maximum environmental conditions. At no time should the
server run under conditions which violate these specifications.
Electronic specifications
Memory map
SATA
2 SFF 8087 connectors to support as many as 6 SATA devices.
ACPI
ACPI 2.0b compliance
Supports:
■
S0
■
S1
■
S5
Variable
Requirements
Temperature
Nonoperating: -40° to 158°F (-40° to 70°C)
Operating: 50° to 95°F (10° to 35°C) with a maximum rate of change not
to exceed 10° per hour
Humidity
Nonoperating: + 10% to +95%
Operating: +20% to +80%
Acoustic noise
Sound Pressure: 58 dBA (Rackmount) in an idle state at typical office
ambient temperature. (73.4 +/- ° F) Sound Power: 6.8 BA in an idle state
at typical office ambient temperature. (73.4 +/- 3.6° F)
Shock
Operating - 5.0 g, 11 mSec, 1/2 sine
Unpackaged - 25 g, velocity change 136 inches/sec
(
≧ 40 lbs to > 80 lbs).
Packaged - Non-palletized free fall in height 24 inches (
≧40 lbs to > 80 lbs)
Vibration
Unpackaged - 5 Hz to 500 Hz, 2.20 g RMS random
Electrostatic
discharge (ESD)
Tested to +/-15 kV - direct contact
+/- 8kV - air discharge
System cooling
requirement in
BTU/Hr
2219 BTU/hour for one 650 W power supply module
4438 BTU/hour for two 650 W power supply modules
Address Range (hex)
Amount
Function
0 to 07FFFFh
640 KB
DOS region, base system memory
0A0000h to 0BFFFFh
128 KB
Video or SMM memory
0C0000h and 0DFFFFh
128 KB
Expansion card BIOS and buffer area
0E0000h to 0FFFFFh
128 KB
System BIOS
0E0000h to 0EFFFFh
2 MB
Extended system BIOS
FC000000h to FFFFFFFFh
64 MB
PCI memory space