Gateway E-9425R - Manual (Page 41)

www.gateway.com
35
8 Follow the instructions in “Closing the server case” on page 30 .
9 Reinstall the bezel, if required, by snapping it into place on the front of the chassis.
10 Reconnect all power cords and peripheral device cables, then turn on the server.
Filling empty drive bays
Empty drive bays in the server must be filled by empty drive trays. With the bezel removed,
install the appropriate tray, then replace the bezel by snapping it into place on the front of the
server. Empty drive carriers for unused drive bays are included with your server.
Thumbscrew
Diskette drive/adapter
assembly (inserted)