Gateway 8450R - Manual (Page 89)

88 Replacing and Adding Internal Devices
9 Tighten the thumbscrew at the bottom of the power supply to secure it
in place.
10 Place the upper drive bay bracket on the top of the chassis. Make sure
the tabs on the bottom of the bracket fit into the slots at either side of
the chassis.
11 Slide the upper drive bay bracket back to set the tabs, then replace the
four screws you removed in Step 3.
12 Close the case. (See “Closing the case” on page 31.)
13 Reconnect the power cord and all external peripherals, then turn on the
server.
8506284.book Page 88 Thursday, July 13, 2000 11:43 AM