Gateway 8450R - Manual (Page 111)

110 Replacing and Adding Internal Devices
20 Slide the electronics bay back into the chassis and secure it in place with
the four screws you removed in Step 5.
21 Reconnect the system cables to the appropriate connectors on the system
board. See “System board” on page 13 for reference.
22 Replace the expansion cards and connect any required cables to the
expansion cards.
23 Close the case. (See “Closing the case” on page 31.)
24 Reconnect all peripherals and the power cord, then turn on the server.
25 Open the BIOS setup utility and correct any inaccurate settings. (See
“About the BIOS Setup utility” on page 111 for more information.)
8506284.book Page 110 Thursday, July 13, 2000 11:43 AM