Gateway 8450R - Manual (Page 62)

Processors 61
9 Replace the memory board retention bracket, hooking the tab over the
edge of the electronics bay and replacing the screw in the back panel.
10 Close the case. (See “Closing the case” on page 31.)
11 Reconnect the peripherals and the power cord, then turn on the server.
Processors
The server is compatible with the Intel
®
Pentium
®
III 550 MHz and faster
processors with 100 MHz FSB. As many as four processors may be installed
in the server (they must have the same processor and FSB speed). Processor
and FSB speed are automatically detected by the server. Processors must be
installed in order, from slot 1 through slot 4 and a VRM must be installed
for each processor added to the server. Whenever processors are installed, the
most current version of the BIOS should be installed as well (see “Updating
the BIOS” on page 113).
8506284.book Page 61 Thursday, July 13, 2000 11:43 AM