Gateway 7210 - Manual (Page 58)

Memory 51
4 Insert the new DIMM into the socket and align the two notches in the
DIMM with the two notches in the DIMM socket.
5 Gently press the DIMM into the socket until it is firmly seated. Inserting
the DIMM automatically locks the socket clamps on each end of the
DIMM.
6 Close the case. (See “Closing the case” on page 27.)
7 Reconnect the peripherals and the power cord, then turn on the system.
8505945.book Page 51 Thursday, March 9, 2000 2:13 PM