Gateway 7210 - Manual (Page 32)

Opening the case 25
Removing the front bezel
The locking front bezel provides secure access to the system components. You
must unlock and remove the front bezel before you can remove the side panel
and access the interior of the system.
To remove the front bezel:
1 Power down, turn off, and disconnect all power to the server.
2 Observe all safety and static electricity precautions, see “Preventing static
electricity discharge” on page 22.
3 Unlock the front bezel, if it is not already unlocked.
4 Press the tabs at the sides of the bezel and pull the top of the bezel away
from the server.
5 Lift the bezel away from the chassis.
8505945.book Page 25 Thursday, March 9, 2000 2:13 PM