Gateway 7210 - Manual (Page 23)

16 System Setup
Installing the outriggers and castors
The tower chassis is shipped with small rubber feet to prevent it from slipping
and to minimize vibrations when the chassis is placed on a desktop. However,
if you intend to place the chassis on the floor, you may find it easier to
maintain the system if it has castors and can be rolled out for easier access.
To install the outriggers and castors:
1 Gently turn the chassis upside down, placing it on the top panel.
2 Align the outriggers and castors with the slots on the bottom panel of
the chassis.
8505945.book Page 16 Thursday, March 9, 2000 2:13 PM