Gateway 7210 - Manual (Page 26)

Turning off the server 19
4 If you need to return to the previous dialog box to change any of your
entries, click
Back .
5 Restart the server. The setup is complete.
Turning off the server
Every time you turn off the server, shut down the operating system first. You
may lose data if you do not follow the proper procedure.
To turn off the server in Windows NT:
1 Click Start , then select Shut down the computer? , then Shut Down .
2 Click OK . The operating system shuts down. When you see a message
saying It is now safe to turn off your computer , turn off the computer by
pressing the power button.
3 Turn off the monitor and peripherals.
Important For other operating systems, such as Windows ® 2000 or
Novell
®
Netware, refer to the appropriate operating system
software manual.
Important For other operating systems, such as Windows 2000 or
Novell Netware, refer to the appropriate operating system
software manual.
Warning When you turn the computer off, some electric current still
flows through it. Before opening the computer case or
connecting or removing any peripherals, turn off the
computer, then unplug the power cord.
8505945.book Page 19 Thursday, March 9, 2000 2:13 PM