GarrettCom 6K16V - Manual (Page 51)

Magnum 6K16V Managed Fiber Switch Installation and User Guide (01/04)
44
www GarrettCom com . .
when connecting to a hub or another switch.
The switch is configured as (=) position by default settings from the factory,
the left-most RJ-45 port is used for segments going to workstations and other user node
device connections as other
ports of the module. For
cascaded and up-link
connections (i.e.: a
connection to another hub
or switch typically), the
uplink switch should be in
the OUT (X) position.
Each port has an
Activity (ACT) LED
indicating packets being
received, a Link (LK) LED that indicates proper connectivity with the remote device
when lit, a FDX/HDX LED to indicate full-duplex mode when lit (or half-duplex when
off), and a “10/100” LED indicating 100Mb when lit (or 10 Mbps when off).
Important Note: For the 6KP8V-RJ45 Crossover Switch-Inside
is set for (=) by default from the factory for the Port # 1
and act similar as other user port.
The RJ-45 pins normally (TP crossover switch) are per the standard for hubs-to-
users twisted pair wiring: 1 = receive+, 2 = receive-, 3 = transmit+, 6 = transmit-,
other pins not used. When the TP crossover push-button is UP, the pins of the RJ-
45 port are per the standard for up-links using twisted pair wiring, i.e., the transmit
and the receive pairs are exchanged: 1 = transmit+, 2 = transmit-, 3 = receive+, 6 =
receive-, other pins not used.
5.2.10 GBIC-SXSC Gigabit fiber(1000Mb), multi-mode SC Connector
The Magnum GBIC-SXSC
is a multi-mode Gigabit fiber connector
equipped with SC type connectors and can be
easily snapped in and out. The Gigabit fiber
ports are most popular as server-to-switch and switch-to-switch applications. It supports
cable distances up to the IEEE 802.3z standard 1000Mbps distance limits, i.e., 550m at
full duplex.
6KP8-RJ45,
8 Port@ 10/100Mb Copper ports
4
4
FULL/HALF
1
ACTIVITY
LINK 2
3
10/100
2
1 3 5 7
10/100 LK
1
3
F/H ACT
10/100 LK
2 4 6 8 F/ H ACT