GarrettCom 6K16V - Manual (Page 44)

Magnum 6K16V Managed Fiber Switch Installation and User Guide (01/04)
37
www GarrettCom com . .
5.0 Introduction - Magnum 6K16V Managed Fiber Switch Port
Modules
This chapter describes each Port Module (PM), including appearance,
functionality, and status displays.
5.1 Inspecting the Package and Product
This section applies only to PMs shipped as separate items, i.e., 6K16V PMs
not factory installed in a Magnum 6K16V PM slot.
Examine the shipping container for obvious damage prior to
installing a 6K16V PM; notify the carrier of any damage you believe occurred
during shipment or delivery. Inspect the contents of this package for any signs
of damage and ensure that the items listed below are included.
This package should contain:
1 or more 6K16V PMs
Installation instructions, with illustrations
Remove the 6K16V PM(s) from the shipping container. Be sure to
keep the shipping container should you need to ship any of the PMs separately
at a later date. In the event there are items missing or damaged, contact your
supplier. If you need to return the unit, use the original shipping container if
possible. Refer to Chapter 5 for specific return procedures.
5.2 6KPM Module Description
An important feature of the Magnum 6K16V is the use of Port
Modules for flexible mixed-media connectivity to RJ-45 and fiber media. Since
the Magnum 6K16V Switches have dual-speed capability for copper ports, the
6 or 8-port interfaces are designed to support all standard Ethernet media types
at 10 or 100Mps speed. Each 6K16V PM provides six or eight ports for
connecting Ethernet segments with its individual connector type and media.
For a list of 6K16V Port Module types, refer to Section 1.2
Each 6K16V PM is individually described in the following sections.
NOTE: The port #1 on the RJ-45 ports on all the modules, either all