Genicom MatrixPrinter LA36 - Manual (Page 73)

4-37
4.9.3 Lubrication
Lubrication is required only when the printer is overhauled or mechanical components are replaced.
Lubrication codes are as follows:
2-GD-D-O
Cycle
Amount (1 drop)
Type (Mobil oil)
No.
1. No.
Sequential number for the location to be lubricated
2. Type
FL: Floil
SG: Silicone grease
3. Amount
D: 1 drop
S: Several drops
F: Fill the case or oil wick.
C: Cover with thin uniform film
4. Cycle
O: At overhaul