Genicom MatrixPrinter LA36 - Manual (Page 65)

4-29
(16) Paper feeder assembly replacement
Removal
1. Remove the printing mechanism (Section 4.9.1(5), platen assembly (Section 4.9.1(9)), print head (Section
4.9.1(14)), and gear assembly (Section 4.9.1(15)).
2. Remove the two screws to remove the paper feeder assembly.
Sensor assemblies
Installation
Install the Paper feeder assembly in reverse order of removal.
Notes:
The paper feeder assembly contains two paper sensor assemblies.
Make sure that the positioning projections at both sides of the paper feeder assembly fit in the corresponding
dowels and cuts of the side frames.
Paper feeder assembly
Align
Align
Align
Paper feeder assembly
Side frame
Projections