Genicom MatrixPrinter LA36 - Manual (Page 32)

3-11
See page 3-12.
• Defective printer control board
• Defective power supply board
Plug in the connector correctly.
Replace the cable. Replace the cable.
Check the host computer.
Plug in the corresponding
connectors correctly.
Defective printer control board
Check the host computer.
Yes
Yes
No
Yes
No
No
No
No
Yes
Yes
Yes
Yes
No
No
Continued from the previous page
Are several character dots missing?
Is self-test printing normal?
See Section 4.10.1 for self-test.
Is the interface cable connected
correctly?
Is the interface cable OK?
Is data OK? Use hex dump mode.
See Section 4.10.2.
Are all connectors to the control
board connected?
Is printing done correctly?
End