FUJITSU VSS Hardware Provider 2.1 - Manual (Page 94)

Chapter 9 Messages
9.2 Command Messages
ETERNUS VSS Hardware Provider 2.1 User’s Guide
Copyright 2012 FUJITSU LIMITED P3AM-4582-03ENZ0
94
9.2 Command Messages
VSSHP outputs a message when executing each command.
The following shows the output format of messages.
Message number Error type Message
■ STXV0001 ERROR Failed to register hardware provider.
[Meaning]
Failed to register hardware provider. The process is canceled.
[Action]
Refer to
"10.2 How to Obtain Error Information" (page 131) , and prepare the required information
before contacting a Fujitsu field engineer (FE).
■ STXV0002 WARNING Hardware provider already registered.
[Meaning]
A hardware provider has already been registered. The process is canceled.
[Action]
Check the currently registered hardware provider. If necessary, delete the current hardware provider
and try again.
■ STXV0003 ERROR Failed to delete hardware provider.
[Meaning]
Failed to delete hardware provider. The process is canceled.
[Action]
Refer to
"10.2 How to Obtain Error Information" (page 131) , and prepare the required information
before contacting a Fujitsu field engineer (FE).
■ STXV0004 WARNING Hardware provider already deleted.
[Meaning]
The hardware provider has already been deleted. The process is canceled.
[Action]
If necessary, register a hardware provider.