FUJITSU VSS Hardware Provider 2.1 - Manual (Page 36)

Chapter 4 Environment Creation
4.1 New Installation
ETERNUS VSS Hardware Provider 2.1 User’s Guide
Copyright 2012 FUJITSU LIMITED P3AM-4582-03ENZ0
36
3
After installation, continue to set the environment. The following window appears.
4
Select "Backup server (Transportable copy)" and click the [OK] button.
The communication service (ETERNUS VSS Hardware Provider Communication Server service)
setting is performed.
The service name is registered as "stxvcommunication".
When the [Skip] button is clicked, installation completes without the environment being set. Set a
Shadow Copy destination and communication environment after the installation.
Refer to
"Chapter 6 Operation Change" (page 45) for details.
The following window appears. Check the port number, select the IP version (IPv4 or IPv6), and
click the [OK] button.