FUJITSU VSS Hardware Provider 2.1 - Manual (Page 115)

Chapter 9 Messages
9.2 Command Messages
ETERNUS VSS Hardware Provider 2.1 User’s Guide
Copyright 2012 FUJITSU LIMITED P3AM-4582-03ENZ0
115
■ STXV0604 WARNING Failed to access device.
[Meaning]
Failed to access device.
[Action]
Use [Disk Management] to check that the disk is in normal status.
Start [Disk Management] according to the following procedure:
1
Click the [Start] – [Control Panel], then double-click [Administrative Tools], then
[Computer Management] to start.
2
Click [Computer Management (local)] – [Storage] – [Disk Management].
■ STXV0605 ERROR Internal inconsistency.
[Meaning]
Internal inconsistency. The process is canceled.
[Action]
Refer to
"10.2 How to Obtain Error Information" (page 131) , and prepare the required information
before contacting a Fujitsu field engineer (FE).
■ STXV0701 ERROR Invalid number of parameters.
[Meaning]
The specified number of parameters is invalid. The process is canceled.
[Action]
Correct the parameter, and try again.
■ STXV0702 ERROR Invalid parameter. Parameter = "parameter"
[Meaning]
The specified "parameter" is invalid. The process is canceled.
[Action]
Correct the parameter, and try again.
Check the mount point if it has been specified.