FUJITSU VSS Hardware Provider 2.1 - Manual (Page 23)

Chapter 1 ETERNUS VSS Hardware Provider
1.3 Operational Procedure
ETERNUS VSS Hardware Provider 2.1 User’s Guide
Copyright 2012 FUJITSU LIMITED P3AM-4582-03ENZ0
23
1.3.2 Disk Conditions
The following conditions apply for source disks to be used for backup.
• MBR and GPT can be used for the partition format.
• A dynamic disk cannot be used. When it is used, operation is not guaranteed.
1.3.3 Volume Management Methods and Management Files
One of the following management files is created according to the management method for the Shadow
Copy destination volume.
• Target disk pool management file
"installation folder"\etc\vss\bkdskpl.mng
• Copy set management file
"installation folder"\etc\vss\copyset.cnv
Unnecessary management files may exist due to a reason such as when the management method or
the server configuration is changed.
To delete unnecessary management files that may cause malfunction, refer to the following table and
delete any of these files if they exist.
T: Target disk pool management file
C: Copy set management file
—: No management files are created
• When VSSHP is installed in a host OS that controls the Hyper-V setting, VSSHP supports backup
processes. In this case, only a guest OS disk on the host OS is used as the target for backup pro-
cesses.
• Backup processes for Local Copy Configuration and Transportable Copy Configuration are not
supported when VSSHP is installed in a guest OS that uses the Hyper-V setting.
Local configuration
Transportable configuration
Production server Backup server
Target disk pool operation T — T
Copy set operation C C —