FUJITSU VSS Hardware Provider 2.1 User Manual

Page 101

Chapter 9 Messages
9.2 Command Messages

ETERNUS VSS Hardware Provider 2.1 User’s Guide

P3AM-4582-03ENZ0

101

■

STXV0224 ERROR Failed to access copy set information.

[Meaning]
Failed to access copy set information. Therefore, it cannot be registered.

[Action]
Correct the copy set file, and try again.

■

STXV0225 ERROR Invalid copy set information.

[Meaning]
Copy set information is invalid. Therefore, it cannot be registered.

[Action]
Use the "Backup Status Query Command" to check that no copy session exists.
For details, refer to

Then, delete the copy set management file ("installation folder"\etc\vss\copyset.cnv), and try again.

■

STXV0226 ERROR Failed to register copy set information.

[Meaning]
Failed to register copy set information. Therefore, it cannot be registered.

[Action]
Use the "Backup Status Query Command" to check that no copy session exists.
For details, refer to

Then, delete the copy set management file ("installation folder"\etc\vss\copyset.cnv), and try again.

■

STXV0227 INFO Number of errors: ["number of errors"]

[Meaning]
"number of errors" errors occurred in the copy set file

[Action]
Follow the action for each error message, and try again.

■

STXV0228 INFO Number of warnings: ["number of errors"]

[Meaning]
"number of warnings" warnings occurred in the copy set file.

[Action]
Follow the action for each warning message if necessary, and try again.

■

STXV0229 INFO ["number of copy set information"] copy set information is registered.

[Meaning]
"number of copy set information" copy set information is registered.