FUJITSU VSS Hardware Provider 2.1 - Manual (Page 60)

Chapter 8 Commands
8.6 OLU Number Display Command (stxvgetolu)
ETERNUS VSS Hardware Provider 2.1 User’s Guide
Copyright 2012 FUJITSU LIMITED P3AM-4582-03ENZ0
60
8.6 OLU Number Display Command (stxvgetolu)
This command displays information such as the OLU number and Box ID of the specified ETERNUS
Disk storage systems.
This command can be executed by either a production server or a backup server.
■ Format
■ Description of options
phase The copy status is displayed.
copying: copying
tracking: tracking (the copy process has completed)
trackingcopying: tracking (the copy is being processed)
---: suspended by an error, suspended in the hardware
execute The copy progress is displayed.
nnn%: displayed in percentage
---: other than being copied
update The update rate is displayed.
nnn%: While tracking (the copy process has completed) in QuickOPC operation, this
item is displayed in percentage
---: except while tracking (the copy process has completed) in QuickOPC operation
generation For a SnapOPC+, the generation is displayed.
1 to n: the number of generations
---: operation other than SnapOPC+
transfer The transfer mode type is displayed.
This is not displayed for QuickOPC/SnapOPC+ operation.
---: QuickOPC/SnapOPC+
recovery The setting information of the Recovery mode is displayed.
This is not displayed for QuickOPC/SnapOPC+ operation.
---: QuickOPC/SnapOPC+
Title Description
Check the status of the copy sessions in the Shadow Copy destination disks that are registered in the
target disk pool management file.
"Installation folder"\bin\stxvgetolu [-p physical-disk]
Option Description
-p Specify a physical disk number.
If omitted, information, such as all OLU numbers and Box IDs of ETERNUS Disk
storage systems that are connected to the executed server, is displayed.