FUJITSU VSS Hardware Provider 2.1 User Manual

Page 123

Chapter 9 Messages
9.2 Command Messages

ETERNUS VSS Hardware Provider 2.1 User’s Guide

P3AM-4582-03ENZ0

123

■

STXV3013 ERROR Multiple sessions exist.

[Meaning]
Multiple sessions exist. The process is canceled.

[Action]
Specify the -t option for the Backup Control Command, and try again.

■

STXV3014 ERROR Invalid combination of options.

[Meaning]
The combination of options is invalid. The process is canceled.

[Action]
Check the combination of options, and try again.

■

STXV3017 ERROR Failed to operate the device. "BoxID", "OLU number"

[Meaning]
Failed to operate the device. The process is canceled.

[Action]
Refer to

, and prepare the required information

before contacting a Fujitsu field engineer (FE).

■

STXV3018 ERROR Failed to delete the session. "BoxID", "OLU number", "error code"

[Meaning]
Failed to delete the session. The process is canceled.

[Action]
Refer to

, and prepare the required information

before contacting a Fujitsu field engineer (FE).

■

STXV3019 ERROR -t option cannot be specified since the copy type is SnapOPC+.

[Meaning]
The -t option cannot be specified since the copy type is SnapOPC+. The process is canceled.

[Action]
Try again without specifying the -t option.

■

STXV3020 INFO Copy session was stopped. Source-BoxID = "Box ID", Source-OLU
= "OLU number", Target-BoxID = "Box ID", Target-OLU = "OLU number"

[Meaning]
The copy session was stopped.