FUJITSU VSS Hardware Provider 2.1 - Manual (Page 71)

Chapter 8 Commands
8.10 Hyper-V Environment Setup Command (stxvhyperv)
ETERNUS VSS Hardware Provider 2.1 User’s Guide
Copyright 2012 FUJITSU LIMITED P3AM-4582-03ENZ0
71
■ Displayed contents
8.10 Hyper-V Environment Setup Command (stxvhyperv)
This command sets the environment of the VSSHP Hyper-V.
Execute this command on a production server in which a Hyper-V transportable copy is to be
performed.
■ Format
■ Description of options
Title Description
No. The serial number is displayed.
This number is used with the "add" subcommand and the "delete" subcommand.
DiskNo. The physical disk number is displayed.
The disk number is blank if the disk has been registered in the target disk pool
management file but is not connected to the server.
SDV When the target disk is a SDV, "SDV" is displayed.
The SDV is blank if the target disk is a disk other than SDV.
Size(KB) The disk capacity is displayed in KB.
MountPoint/DriveLetter The mount point and drive letter are displayed.
The mount point and drive letter are displayed when the "add" subcommand or "list"
subcommand is executed.
If multiple mount points or drive letters are allocated to one disk, one of them is
displayed.
OLU The OLU number is displayed.
The OLU number is displayed by a 4-digit hexadecimal number. "0x" is added as a
prefix to the number.
When the OLU number is 1, "0x0001" is displayed.
The OLU is displayed when the "delete" subcommand or "list detail" subcommand is
executed.
BoxID The Box ID of the ETERNUS Disk storage system is displayed.
The Box ID is displayed when the "delete" subcommand or "list detail" subcommand
is executed.
"Installation folder"\ bin\stxvhyperv [-s | -d]
Option Description
-s Sets the Hyper-V environment.
Creates the following file:
"Installation folder"\etc\vss\vsshp_hyper-v.ini
-d Deletes the Hyper-V environment.
(blank) Displays the Hyper-V environment.
• When the environment is set
VSSHP has been set as a Hyper-V transportable copy.
• When the settings of the environment are deleted
VSSHP is not set as a Hyper-V transportable copy.