FUJITSU VSS Hardware Provider 2.1 - Manual (Page 87)

Chapter 9 Messages
9.1 Event Log Messages
ETERNUS VSS Hardware Provider 2.1 User’s Guide
Copyright 2012 FUJITSU LIMITED P3AM-4582-03ENZ0
87
■ Event ID: 1009
Type:Error
Messages:STXV1009 ERROR Obtaining of required virtual memory area failed. iReturn =
[internal code]
Details:
The required virtual memory area cannot be obtained. The process is canceled.
Perform the following to obtain the required virtual memory area, and try again.
- Expand the size of the paging file
- Exit unnecessary applications
■ Event ID: 1010
Type:Error
Messages:STXV1010 ERROR Creating a thread of VSS Hardware Provider Communication
Server service failed. errno = [internal code]
Details:
Creating a thread of ETERNUS VSS Hardware Provider Communication Server service failed. The
process is canceled.
Perform the following, and try again.
- Restart the ETERNUS VSS Hardware Provider Communication Server service
- Exit unnecessary applications
- Reboot the server
When this phenomenon occurs often, review the system resources.
■ Event ID: 1011
Type:Error
Messages:STXV1011 ERROR Notification of the service status of VSS Hardware Provider
Communication Server service failed. errno = [internal code]
Details:
Notification of the service status of ETERNUS VSS Hardware Provider Communication Server
service failed. The process is canceled.
Restart the ETERNUS VSS Hardware Provider Communication Server service.
If the problem still persists, refer to
"10.2 How to Obtain Error Information" (page 131) , and prepare
the required information before contacting a Fujitsu field engineer (FE).