beautypg.com

FUJITSU VSS Hardware Provider 2.1 User Manual

Page 73

background image

Chapter 8 Commands
8.11 Shadow Copy Destination Recovery Command (stxvrecoverydisk)

ETERNUS VSS Hardware Provider 2.1 User’s Guide

Copyright 2012 FUJITSU LIMITED

P3AM-4582-03ENZ0

73

8.11

Shadow Copy Destination Recovery Command
(stxvrecoverydisk)

If a backup ends abnormally, the Shadow Copy destination disk may not be able to be checked via
[Disk Management] in the OS, resulting in the backup process being stopped. If this is the case, use
this command to make the Shadow Copy destination disk checkable via [Disk Management].
Execute this command on a backup server.
If a Hyper-V transportable copy is performed, execute this command on a production server and a
backup server.

Format

Execution example

When there is a target disk for recovery

When there is no target disk for recovery

"Installation folder"\bin\stxvrecoverydisk

C:\>"C:\Program Files\ETERNUS VSS Hardware Provider\bin\stxvrecoverydisk"
stxvrecoverydisk successfully completed.

C:\>

C:\>"C:\Program Files\ETERNUS VSS Hardware Provider\bin\stxvrecoverydisk"
There is no target disk for recovery.

C:\>

Do not execute this command while performing backup using VSSHP. Doing so may result in the
backup ending abnormally.

This command may take time to complete its operation.