FUJITSU PRIMERGY RX600 S6 - Manual (Page 59)

RX600 S6 Operating Manual 59
Starting up and operation
5.1.1.1 Control elements
ID ID button
ID LED lights up (blue) on the front and on the rear of the server
when the ID button is pressed. Both ID indicators are
synchronized.
On/Off button
When the system is switched off, it can be switched on again by
pressing the On/Off button.
When the system is operating, pressing the On/Off button will
switch off the system.
V
CAUTION!
Risk of loss of data!
I
The On/Off button does not disconnect the server from the
mains voltage. To disconnect from the mains completely,
remove the power plug(s).
RST Reset button
Pressing the reset button reboots the system.
V
CAUTION!
Risk of loss of data!
NMI NMI button
V
CAUTION!
Do not press! Risk of loss of data! The NMI button may only
be used by service.