FUJITSU PRIMERGY RX600 S6 - Manual (Page 109)

RX600 S6 Operating Manual 109
CSS components
8.1.5 Hot-plug memory boards
V
CAUTION!
● The actions described in this section may only be performed by
personnel with the appropriate technical training. (The device can be
seriously damaged if it is opened without authorization or if repairs
are attempted by untrained personnel.)
● Please observe the safety information in chapter "Important
information" on page 27 .
The system board has space for up to eight memory boards, each of which can
be equipped with up to eight memory modules. The slots for the main memory
are suitable for 4 GB, 8 GB, 16 GB and 32 GB DDR3 RDIMMs / LV-RDIMMs
with 1066/1333 MHz.
A possible memory module fault is reported by the CSS indicator lighting up on
the front and rear of the server or displayed on the ServerView Local Service
Display (for more information about the behavior of the Local Service Display,
see chapter
"Starting up and operation" on page 57 and the "Customer Self
Service (CSS)" manual on the ServerView Suite DVD 2).