Furuno NAVNET 1833 - Manual (Page 194)

5. CUSTOMIZING YOUR UNIT
5-24
5.7.3 TD display setup
The TD SETUP menu sets which Loran C or Decca chain to use to display TD
position. (Connection of a Loran C or Decca navigator is not necessary to
display TD position.) Press the [MENU] key followed by the SYSTEM
CONFIGURATION, NAV OPTION and TD SETUP soft keys to display this menu.
TD
SETUP
RETURN
EDIT
LORAN-C
GRI
9940:11-27
U.S. WEST COAST
CORRECTION 1
+000.0 µs
CORRECTION 2
+000.0 µs
DECCA
CHAIN
01 R-G
S BALTIC
CORRECTION 1
+00.00 lane
CORRECTION 2
+00.00 lane
TD setup menu
Displaying Loran C TDs
1. Select GRI, then press the EDIT soft key to show the GRI & station pair
window.
GRI & STATION PAIR
U.S. WEST COAST
9940 11-27
▲
▼
▼
Loran GRI & station pair window
2. Adjust the trackball upward or downward to select GRI code.
3. Roll the trackball rightward to show the display below, to enable selection of
station pair.
GRI & STATION PAIR
U.S. WEST COAST
11-27 9940
▲
▼
▼
Loran C GRI & station pair window
4. Adjust the trackball vertically to select station pair.