Furuno NAVNET 1833 - Manual (Page 193)

5. CUSTOMIZING YOUR UNIT
5-23
WAAS SETUP
Press the WAAS SETUP soft key to show the WAAS SETUP display.
Note: This function requires GP-320B.
Contents of WAAS SETUP menu
Item Description Settings Default setting
WAAS MODE Select ON to use the WAAS mode. On, Off Off
WAAS SEARCH WAAS satellite can be searched
automatically or manually. For manual
search, enter appropriate WAAS satellite
number. Auto, Manual
DISABLE GEO Not used.
WAAS ALARM When the WAAS signal is lost, the audible
alarm sounds with the visual message
“NO WAAS SIGNAL.”
On: Alarm continues to sound until the
WAAS positioning mode is available again
or the alarm is recognized by key
operation.
Off: Alarm sounds three times.
On, Off Off
CORRECTION
DATA SET Selects the type of message for WAAS
correction. Use "02 (Default Setting)" until
the WAAS System changes from its
current "Testing Status" to "Operational
Status". 00 to 27, 99 02