FUJITSU C145-C037-01EN - Manual (Page 72)

5-24
ESC * s # I Request status readback storage information.
(#: 0=font, 1=macro, 2=user defined pattern, 3=symbol set (for unbound
scalable font), 4=font extended)
ESC * s # T Set status readback location type. (#: 0=invalid location, 1=currently selected,
2=all locations, 3=internal, 4=downloaded, 5 and 7=SIMMs)
ESC * s # U Set status readback location unit.
Location type #
0 * (invalid location)
1 * (currently selected)
2 * (all locations)
3 0=all internal
4 0=all down loaded
1=temporary down load
2 =permanent download
5 0=all SIMMs
and 1=highest priority SINNMMs
7 2=lowest priority SINNMMs
ESC * s # X Return the reply data to the host computer.
ESC * s 1 M Replay the total capacity of available memory.
ESC * t # R Set the raster graphics resolution. (#: dots per inch; ex. for 600 dpi: 0 to
75=75, 75 (<75) to 100=100, 100 (<100) to 150=150, 150 (<150) to 200=200,
200 (<200) to 300=300, 300 or larger =600)
ESC * t # S Specify the width of the raster graphics area. (#: 0 to logical paper width minus
current left graphics margin)
ESC * t # T Specify the height of the raster graphics area. (#: 0 to logical paper length
minus current vertical cursor position)
ESC * v # N Select a source transparency mode. (#: The remainder when # is divided by
256 is used as the parameter; 0=source is transparent, 1=source is opaque)
ESC * v # O Select a pattern transparency mode. (#: The remainder when # is divided by
256 is used as the parameter; 0=pattern is transparent, 1=pattern is opaque)
ESC * v # T Set the print model pattern. (#: 0=solid fill (default), 1=white fill, 2=PCL
shading pattern, 3=PCL cross-hatching pattern)