FUJITSU C145-C037-01EN - Manual (Page 31)

3-11
3.2 Paper Specifications
The PrintPartner 20W prints on a variety of types and sizes of paper, so long as they meet the requirements shown
below. Pretest unspecified or unusual printing materials to ensure that they do not cause a problem in charging,
heating, or paper feeding.
3.2.1 Type, size, and thickness
Type
Paper tray: Plain cut-sheet photocopy paper (equivalent to Xerox 4024) and bond
paper
MFF: In addition to the above, overhead projector transparencies (equivalent
to 3M 731), envelopes (COM-10, Monarch, C5, DL, and B5), and
labels
Size
Paper tray: A3 (portrait) 297 mm
×
420 mm (11.7
×
16.5 in)
A4 (landscape) 210 mm
×
297 mm (8.3
×
11.7 in)
A5 (portrait) 148 mm
×
210 mm (5.8
×
8.3 in)
JIS B4 (portrait) 257 mm
×
364 mm (10.1
×
14.3 in)
JIS B5 (landscape) 182 mm
×
257 mm (7.2
×
10.1 in)
Ledger (portrait) 279.4 mm
×
431.8 mm (11
×
17 in)
Legal (portrait) 215.9 mm
×
355.6 mm (8.5
×
14 in)
Letter (landscape) 215.9 mm
×
279.4 mm (8.5
×
11 in)
Executive (landscape) 184.2 mm
×
266.7 mm (7.25
×
10.5 in)
MFF: A3, A4, A5, B4, B5, Ledger, Letter, Legal, and Executive
COM-10, Monarch, C5, DL, and B5 (envelopes)
Simplex Min. 100 mm wide
×
148 mm long (3.94
×
5.81 in)
Max. 297 mm wide
×
431.8 mm long (11.7
×
17 in)
Duplex Min. 100 mm wide
×
182 mm long (3.94
×
7.17 in)
Max. 297 mm wide
×
431.8 mm long (11.7
×
17 in)
Thickness (weight) Practical values depend on paper quality.
Paper tray: 64 to 90 g/m 2 (55 to 78 kg or 17 to 24 lb. bond)
MFF: Simplex 64 to 128 g/m 2 (55 to 110 kg or 17 to 34 lb. bond)
Duplex 64 to 90 g/m 2 (55 to 78 kg or 17 to 24 lb. bond)
Special paper (transparency films, envelopes, adhesive labels)
Note:
The ream weight is given in parentheses: kilogram weight of 1000 sheets of 788 mm
×
1091 mm paper (1.16 g/m 2 )
or pound weight of 500 sheets of 17 inch
×
22 inch paper (3.76 g/m 2 )