FUJITSU C145-C037-01EN - Manual (Page 41)

4-7
PCL Font Settings Typeface – CourierMd*, MorrisonRg, Taurus, etc.
Font Source – Internal*, Soft Font, SIMM Font
Symbol Set – Roman 8*, PC–8, etc...
Pitch – 10.00*, or 0.44 to 99.99 (0.01 increments)
Point Size – 12.00*, or 4.00 to 999.75 (0.25 increments)
Courier Style – Regular* or Dark
Print Quality Smoothing – On* or Off
Resolution – 300 dpi or 600 dpi* or 1200 dpi
Economy Mode – On or Off*
Thick Paper – On or Off*
Toner density – 5*, or 1 to 10
SEND
EXIT
Menu Bar Library Read User Settings
Read Default Settings
Save Current Settings
Upload
Send
Exit
Special Personality Setting – Auto*, PCL, FPS
Print Report – Self Test Report or Font List Report
Clear Warning – Print Unit
FPS Related Settings – Jam Recovery: On or Off*
– FPS Error Reporting
Auto Continue – On* or Off or Extension
PCL Menu – Top Offset: 0.0* or –25.0 to +25.0 mm (0.1 mm increments)
– Left Offset: 0.0* or –25.0 to +25.0 mm (0.1 mm increments)
– A4 Print Width: Normal* or 80 Columns/Line
– Auto Attach FF: No* or Yes
– Auto CR: LF* or LF+CR
– Auto LF: CR* or CR+LF
Power Save – Off, After 15minutes*, After 30minutes, After 60minutes, After 120minutes
Expansion of – Thick Control: Normal* or Extension
Thick Paper – Manual Media: 0*, or –2 to 5
– Tray1 Media: 0*, or –2 to 5
– Tray2 Media: 0*, or –2 to 5
– Tray3 Media: 0*, or –2 to 5
– Tray4 Media: 0*, or –2 to 5
– MFF Media: 0*, or –2 to 5
MFF Mode – First* or Cassette
Option Interface Settings – I/O Timeout: 15*, or 5 to 300 seconds
– Baud Rate: 19200, 9600*, 4800, 2400
Interface Port Select – Parallel Interface: LPT1*, LPT2, LPT3
– Serial Interface: COM1* or COM2
Help General Information
Keyboard Layout
Help Index
How to Use the Mouse
About