FUJITSU C145-C037-01EN - Manual (Page 27)

3-7
Specification
The average life is determined by the total drive time under the
following conditions. The table below lists the number of prints.
Conditions 1
Printing mode: 2 sheets/job
Pre-pick: Off
Paper: A4, landscape
Environment: 17.5 to 25˚C, 30% to 70% RH
Single-sided printing (sheets) Life (sheets)
2/job, average 34,000
1/job - continuous, min to max 10,000 to 40,000 (reference)
Conditions 2
Printing mode: 4 pages/job (high-speed duplex printing)
Pre-pick: Off
Paper: A4 landscape
Environment: 17.5 to 25˚C, 30% to 70% RH
Double-sided printing (pages) Life (pages)
4/job, average 30,000
2/job - continuous, min to max 10,000 to 40,000 (reference)
Notes:
1) Frequently turning power on/off decreases the number of prints
(number of sheets or pages).
2) If “pre-pick” is On, the number of sheets or pages decrease.
The bottle life is indicated by the average number of prints made
under the following conditions (until the toner empty is indicated).
Conditions
Single-sided printing
Black-to-white ratio: 5%
Printing mode: 2 pages/job
Paper: A4, landscape
Environment: 17.5 to 25˚C, 30% to 70% RH
Single-sided printing (pages) Life (pages)
Average life 4,500 to 5,500
Unit life (three bottles) 15,000
First toner bottle life 2,500
Fuser unit Avarage: 100,000 pages (A4, landscape)
Transfer unit Avarage: 100,000 pages (A4, landscape)
Separator pad Average: 200,000 pages (A4, landscape)
Power supply LV 10,000 hours or more
Optical unit 2,000 hours or more (printing time)
DC fan 30,000 hours or more
Note: Maintenace parts except the above parts are stated in the
Maintenace Spare Parts List.
No.
24
25
Item
Consumables
Regular maintenance parts and
life time
Print unit
Toner unit
(three toner
bottles/unit)
* Life varies
according to
the printing
mode.