FUJITSU C145-C037-01EN - Manual (Page 71)

5-23
ESC * c # E Specify the character code for the character downloaded next. (#: 0 to 65535)
ESC * c # F Select a soft font management function. (#: 0=delete all, 1=delete all temporary
fonts, 2=delete last ID font, 3=delete last character of last ID font, 4=make
temporary, 5=make permanent, 6=copy the current font with the current ID)
ESC * c # G Specify the shading level or the fill pattern ID. (#: 0 to 32767;
For shading 1=100; 1=1% dark, 100=100% dark
For pattern 1-6; 1=horizontal line, 2=vertical line, 3=diagonal line (///),
4=diagonal line (\\\), 5=square hatching, 6=diamond hatching)
ESC * c # H Specify the horizontal size of a rectangle. (#: 1/720" increments; -32767 to
32767)
ESC * c # P Fill the rectangle.
(0=solid fill, 1=white fill, 2=shaded fill, 3=cross-hatched fill, 4=fill with the user
defined pattern, 5=fill with the current pattern)
ESC * c # Q Control user defined pattern.
(#: 0=delete all, 1=delete last temporary pattern, 2=delete last ID pattern.
4=make temporary last ID pattern, 5=make permanent last ID pattern)
ESC * c # R Set symbol set ID code. (#: 0 to 32767)
ESC * c # S Symbol set control.
ESC * c # V Specify the vertical size of a rectangle. (#: 1/720" increments; -32767 to
32767)
ESC * c # W User defined pattern.
ESC * p # X Move the cursor to the new horizontal position. (#: dots; plus signed=relatively
right, minus signed=relatively left, no sign=absolutely from the left edge)
ESC * p # R Set pattern reference point.
(#: 0=rotate with the print direction, 1=fix)
ESC * p # Y Move the cursor to the new vertical position. (#: PCL unit; plus
signed=relatively downward, minus signed=relatively upward, no
sign=absolutely from the top margin)
ESC * r # A Start printing raster graphics. Specify the left margin of raster graphics. (#:
0=position 0, 1=current position)
ESC * r # C End printing raster graphics. Specify the end of raster graphics data transfer.
(#: any value)
ESC * r # F Set the raster graphics presentation mode. (#: 0=raster row in X axis of logical
page, 3=raster row in lateral axis of physical page)