FUJITSU C145-C037-01EN - Manual (Page 20)

2-4
2.3 Structure
The standard printer without options has the following structure, shown in Figure 2.2. The main power supply and
fuser unit differ with AC input voltage (120 or 230 VAC).
LD unit
Print unit
Second eject roller
Multi-function
feeder (MFF)
Stacker-full sensor
Resist roller
Toner sensor
Discharge LED
Fuser unit
Face-up
stacker
Paper tray 2 (Paper tray 3) Duplex unit (Paper tray 1) Paper tray 1 (Paper tray 2)
Transfer roller
Paper tray 3 (Paper tray 4)
Pick roller
➞
: Paper path
Figure 2.2
Structure (with duplex unit + paper trays 1 to 3)
Resist sensor
PE sensor (Pick roller)
Feed roller
Resist sensor
PE sensor Pick roller
Feed roller
Face-down
stacker
Eject sensor First eject sensor
Duplex sensor
Power supply unit