FUJITSU fi-5950 - Manual (Page 62)

42
2.12 Feeding Documents Manually
7. Repeat the procedure 6 until all the documents are scanned.
⇒ After a certain time period of inactivity or at pressing of [send to] button, the scanner will
recognize it as “no document” and stop scanning.
8. To deactivate the “Manual Feed Mode” (Continuous Feed), press down
the Hopper Height Button ( ) on the Operator Panel for more than 3
seconds.
HINT
For setting the timeout for feeding the document manually, refer to section
“8.25 Timeout for Manual Feeding” on page 217 .