1 scanner settings – FUJITSU fi-5950 User Manual
Page 206
186
8.1 Scanner Settings
[Default] button
Resets the current settings to the factory setting.
[Save]button
Saves contents of various settings onto the computer.
(Use this button to apply the same settings to other fi-5950 scanners.)
[Restore] button
Restores contents of the settings saved onto the computer back to the scanner.
Timeout for man-
ual feeding
Specify the standby time period. After the
predetermined time period has elapsed,
manual feeding mode is canceled.
5, 10, 20, 30, 40, 50, 60, 70, 80,
90, 100, 110 ,120, 180, 240,
300, 360, 420, 480, 540, 600,
900, 1200, 1800, 1999
(seconds)
10 seconds
Scan Setting for
Document with
Tab(Automatic
Page Size Detec-
tion)
When the document has tab on the bottom
edge of the image, the tab image remains
even if the document is scanned with
Automatic Page Size Detection. When
“Tab-attached document” is specified, the
tab image remains in the scanned data but
the scanning speed may be rather slow.
Document with tab/Document
without tab
Document
without tab
Paper stop posi-
tion at multifeed
error
When a multifeed error is detected by over-
lapping of documents, the position to stop
the documents on which the multifeed
occurred can be selected.
Normal / Paper output slot
Normal
Overscan Control
Specify the optimal amount of black mar-
gins for overscan.
Normal / Optimize
Normal
ATTENTION
Saving outputs the EEPROM value currently written in the scanner. Click the
[Apply] button first if you have changed the value immediately before saving.
Item
Explanation
Selectable parameter
Default