beautypg.com

3 offset/scan scale, Refer to, 3 offset/scan scale” on – FUJITSU fi-5950 User Manual

Page 208

background image

188

8.3 Offset/Scan scale

8.3 Offset/Scan scale

When the position of the scanned image is not correct or the image is elongated, use the following proce-
dure to adjust the Offset and the Scan scale for correction.

1.

Start up the Software Operation Panel.

Refer to

“8.1 Scanner Settings” on page 173

.

2.

Select [Device Setting] from left side list in the window, and press
[Offset...].

ATTENTION

The factory default setting are appropriate, so normally there is no need to
make any adjustment.

See also other documents in the category FUJITSU Scanners: