Scanner settings – FUJITSU fi-5950 User Manual
Page 205
185
8.1 Scanner Settings
8
SCANNER SETTINGS
Retain current
paper thickness
The Paper thickness setting on the Operator
panel is memorized and displayed after turn-
ing off and on the power.
Remember/Do not remember
Do not
remember
Cleaning Cycle
The cleaning cycle of the scanner is speci-
fied by this setting. When Page counter
(Consumable counter) exceeds the value
specified here, the background color of the
counter becomes yellow, and the message to
ask user to clean the scanner may appear.
1,000 to 255,000 sheets,with
1,000 sheets increment
Show cleaning instructions:
Yes/No
10,000 sheets
No
Life Counter
Alarm Setting
When the Page counter (Consumable coun-
ter) described in Section 5.2 exceeds the
value specified here, the counter background
color becomes yellow.
For each consumable
10,000 to 2,550,000 with
10,000 increment
600,000 sheets
Set the interval
for feeding sheets
If the document is skewed and a section of
the scanned image will be cut off, Automatic
Page Size Detection automatically selects a
page size to ensure that all the image is
scanned successfully. As a result, scanning
time may take longer due to the page size
selected.
4 steps from Short (Default) to
Long
Short
Thin Paper Mode
To scan thin paper documents, enable this
mode.
Disable/Thin paper mode/
Super-thin paper mode
Disable
Soft Pick Setting
When a number of sheets are picked at a
time and multi-feed is detected frequently,
this setting may be effective.
Enable/Disable
Disable
Paper jam detec-
tion
Specify the degree of jam detection at the
feeder.
Normal/Sensitivity-Low
Sensitivity-
Low
AutoCrop Bound-
ary
Specify the AutoCrop Boundary processing
for when “Automatic Page Size Detection”
is selected.
Round Up/Round Down/Opti-
mize
Round Down
SCSI Bus Width
Specify the data transfer width for SCSI
connection.
16 bit (Wide)/8 bit
16 bit (Wide)
Auto color Detec-
tion
Specify the slice level for automatically
detecting Color/Monochrome
1 to 255 (steps)
5
Alarm setting
For the beeper to sound the alarm of a paper
jam or multifeed, select Alarm at error.
Disable alarm/Enable alarm
Disable alarm
Jam detection
outside of scan-
nable area when
transporting
paper
By selecting “Enable”, such a case in which
the document is fed outside the scannable
area due to abnormal skew can be judged as
a paper jam.
Enable/Disable
Disable
Imprinter selec-
tion
Select the Pre-imprinter option or the Post-
imprinter option if you have installed the
options (to be purchased separately).
Normal (obey Host specifica-
tion)/Forcibly select Pre-
imprinter/Forcibly select Post-
imprinter
Normal (obey
Host specifica-
tion)
Item
Explanation
Selectable parameter
Default