beautypg.com

20 scsi bus width, Section 8.20 – FUJITSU fi-5950 User Manual

Page 232

background image

212

8.20 SCSI Bus Width

8.20 SCSI Bus Width

When using the SCSI-connected scanner, you can select a data transfer width.

Configure the settings for the SCSI Bus Width as follows:

1.

Start up the Software Operation Panel.

Refer to

“8.1 Scanner Settings” on page 173

.

2.

Select [Device Setting 2] from left side list in the window, and select [SCSI
Bus Width] from its lower level.

3.

Select either 16 bit or 8 bit.

ATTENTION

For Kofax VRS, this setting is not displayed. The SCSI Bus Width is auto-
matically set to [8 bit].

ATTENTION

To use SCSI cards and/or SCSI cables that do not support Ultra Wide SCSI,
select “8 bit”.

See also other documents in the category FUJITSU Scanners: